Powerbag Filling & Care

Powerbags - Filling & Care

To fill the Powerbag use coarse grain sand such as sharp sand that is dry, as wet sand may rot the lining.

We recommend filling the bag outside to avoid any mess. Sharp sand is recommended as other types of sand grain may bind together prevent the free flow of material inside the Powerbag.

Unzip the lid to the Powerbag and fold back the end cap.

Remove the 2 zip-ties then open the waterproof bag folding it back over the edge of the Powerbag outer casing, do the same with the inner nylon bag to allow it to be filled.

Place the Powerbag on some scales.

Fill the bag with the necessary amount of sand in order to get it to the correct weight and then pull the drawstring cord tight then tie off the bag with a zip-tie. Make sure to get the ties as tight as possible and leave some room from the end of the bag to allow the sand to flow.

You will then need to tie a knot in the plastic bag and tie off with the other zip-tie.

Once the bags have been pushed back into the Powerbag shell, you will need to zip the Powerbag shut.

We suggest that you periodically check the inner bags to check for any damage to them, or leaking of sand that may occur from using the bag.

• Store your Powerbag away from sunlight.
• Although Powerbags are ideal for outdoor use, if they do become soaked.
• For any reason dry them out and replace the sand.
• Wipe clean with a damp cloth periodically.